User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            EDC HS-5-500:.1ê 5A Shunt
DATE:                  07-Jun-95
AUTHOR:                User Contributed
REVISION:              0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       9
NUMBER OF LINES:       140
CONFIGURATION:         Fluke 5700A
CONFIGURATION:         Fluke 5725A
CONFIGURATION:         Datron 1281
STANDARD:              Leeds & Northrup 4223-B
STANDARD:              Thermo Electric MM II (1)
STANDARD:              Thermo Electric MM II (2)
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-   R     N              P             M              F        W
  1.002  ASK+                                          X
  1.003  STD          Leeds & Northrup 4223-B
  1.004  OPBR         Is the MM II's DTB number 25-30?
  1.005  JMPF         1.008
  1.006  STD          Thermo Electric MM II (1)
  1.007  JMP          1.009
  1.008  STD          Thermo Electric MM II (2)
  1.009  HEAD         ÍÍ INITIAL CONDITIONS ÍÍ
  1.010  DISP         Connect the HI CURRENT OUTPUT from the Fluke 5725A
  1.010  DISP         to one of the large current terminals on the .001ê
  1.010  DISP         Leeds & Northrup Standard Resistor.
  1.011  DISP         Connect the other current terminal on the standard
  1.011  DISP         resistor to one of the current terminals on the UUT.
  1.012  DISP         Connect the other current terminal on the UUT
  1.012  DISP         to the LO CURRENT OUTPUT on the 5725A.
  1.013  DISP         Connect the potential terminals on the Leeds & Northrup
  1.013  DISP         resistor to the HI and LO front inputs on the 1281 DMM.
  1.014  DISP         Connect the potential terminals on the UUT to the
  1.014  DISP         rear CH B input on the 1281 DMM.
  1.015  DISP         Insert temperature probe into the center well
  1.015  DISP         of the standard resistor.
  1.016  IEEE         [@1281]*RST
  1.017  IEEE         [@1281]DCV AUTO;RESL7
  1.018  5700         5A                                             B1 S  2W
  1.019  DISP         Observe the Datron 1281, until the millivolt
  1.019  DISP         reading stabilizes.
  1.020  CALL         Standard Resistor Correction
  1.021  MEME                                                     >3
  1.022  HEAD         {}
  1.023  HEAD         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  1.024  HEAD         {º DC Calibration º}
  1.025  HEAD         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  1.026  HEAD         ÍÍ DC Calibration ÍÍ
  1.027  JMP          2.001
  1.028  EVAL
  2.001  IEEE         [D3000]
  2.002  IEEE         [@1281]RDG?[I]
  2.003  MEME                                                     >1
  2.004  IEEE         [@1281]INPUT CH_B
  2.005  IEEE         [@1281][D1000]RDG?[I]
  2.006  MEME                                                     >2
  2.007  5700         *                                                 S
  2.008  ACC          .100000Z       0.0100%
  2.009  MATH         m[1]=m[1]/m[3]
  2.010  MATH         m[2]=m[2]/m[1]
  2.011  MATH         mem=.1
  2.012  MATH         mem1= m[2]
#  2.013  MATH         mem1=mem1*1000
  2.013  MEMC         Z              0.100000%     ÿ5A
  3.001  IEEE         [@1281]*RST
  3.002  5700         3A                                             B1 S  2W
  3.003  IEEE         [@1281]DCV AUTO;RESL7
  3.004  IEEE         [D3000]
  3.005  IEEE         [@1281]RDG?[I]
  3.006  MEME                                                     >1
  3.007  IEEE         [@1281]INPUT CH_B
  3.008  IEEE         [@1281][D1000]RDG?[I]
  3.009  MEME                                                     >2
  3.010  5700         *                                                 S
  3.011  ACC          .100000Z       0.0100%
  3.012  MATH         m[1]=m[1]/m[3]
  3.013  MATH         m[2]=m[2]/m[1]
  3.014  MATH         mem=.1
  3.015  MATH         mem1= m[2]
 # 3.016  MATH         mem1=mem1*1000
  3.016  MEMC         Z              0.100000%     ÿ3A
  4.001  IEEE         [@1281]*RST
  4.002  5700         1A                                             B1 S  2W
  4.003  IEEE         [@1281]DCV AUTO;RESL7
  4.004  IEEE         [D3000]
  4.005  IEEE         [@1281]RDG?[I]
  4.006  MEME                                                     >1
  4.007  IEEE         [@1281]INPUT CH_B
  4.008  IEEE         [@1281][D1000]RDG?[I]
  4.009  MEME                                                     >2
  4.010  5700         *                                                 S
  4.011  ACC          .100000Z       0.0100%
  4.012  MATH         m[1]=m[1]/m[3]
  4.013  MATH         m[2]=m[2]/m[1]
  4.014  MATH         mem=.1
  4.015  MATH         mem1= m[2]
#  4.016  MATH         mem1=mem1*1000
  4.016  MEMC         Z              0.100000%     ÿ1A
  5.001  IEEE         [@1281]*RST
  5.002  HEAD         {}
  5.003  HEAD         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  5.004  HEAD         {º AC Calibration º}
  5.005  HEAD         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  5.006  HEAD         ÍÍ AC Calibration ÍÍ
  5.007  JMP          6.001
  5.008  EVAL
  6.001  DISP         Disconnect the test setup.
  6.002  DISP         Connect the UUT current terminals directly to the
  6.002  DISP         Fluke 5725A CURRENT OUTPUTS.
  6.003  DISP         Connect the UUT potential terminals to the Datron 1281
  6.003  DISP         HI/LO INPUTS.
  6.004  IEEE         [@1281]*RST
  6.005  IEEE         [@1281]ACV AUTO, FILT40HZ
  6.006  5700         5A                           40H               B1 S  2W
  6.007  IEEE         [@1281][T0]RDG?[I]
  6.008  ACC          .10000Z        0.06%
  6.009  MATH         MEM=MEM/5
  6.010  MEME
  6.011  MEMC         Z              0.5%          40H
  7.001  IEEE         [@1281]ACV AUTO, FILT100HZ
  7.002  5700         5A                           100H              B1 S  2W
  7.003  IEEE         [@1281][T0]RDG?[I]
  7.004  ACC          .10000Z        0.06%
  7.005  MATH         MEM=MEM/5
  7.006  MEME
  7.007  MEMC         Z              0.5%          100H
  8.001  5700         5A                           400H              B1 S  2W
  8.002  IEEE         [@1281][T0]RDG?[I]
  8.003  ACC          .10000Z        0.06%
  8.004  MATH         MEM=MEM/5
  8.005  MEME
  8.006  MEMC         Z              0.5%          400H
  9.001  HEAD         {}
  9.002  DISP         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  9.002  DISP         {º THIS COMPLETES THE VERIFICATION º}
  9.002  DISP         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  9.003  END